Water Above A Classroom Window
Stains run down the wall above windows in a classroom wing.
The flashing where the flat classroom roof meets a taller wall has opened.

As a Somers commercial roofing contractor, we replace and repair roofs on churches, schools, and community buildings, with work scheduled around services, classes, and events.
Somers commercial roofing on churches and schools runs on the building's calendar. Services, classes, and events fill the week, and loud work over a sanctuary or classroom has to wait for empty hours.
We build the schedule with whoever manages the building: a pastor, a facilities director, or a board. Summer and school breaks often carry the noisiest work, with smaller sections done in the evenings.

Institutional buildings leak where their roofs change shape. Here is what staff report and why.
Stains run down the wall above windows in a classroom wing.
The flashing where the flat classroom roof meets a taller wall has opened.
Leaks show up near exterior walls a day after snow melts off the roof.
Ice dams at a low eave or gutter are pushing meltwater back under the roof edge.
Rust-colored stains spread across ceiling tiles in a large open room.
A blocked drain has left water standing over the large roof above the room.
Paint flakes and plaster softens high on the wall near a tower or steeple.
The flashing where the roof meets the tower has opened, letting water run down inside the wall.
A planned roof replacement takes leak worries off the calendar for years of services and classes.
Loud tear-off happens when the building is empty, and the crew leaves the roof closed before evening events.
Flashing where low wings meet taller walls is replaced, ending the stains above classroom windows.
Edge details, gutters, and drains are rebuilt so meltwater leaves the roof instead of freezing at the eave.
The written scope explains each part of the roof job in plain words, ready for a building committee to review.
These systems cover the flat and sloped roofs on churches, schools, and halls.

Rubber membrane suits long, low classroom and hall roofs, with flexible flashing along the taller walls where those wings meet the main building.
EPDM Roofing details
Welded white membrane covers large flat roofs over gyms and halls, reflects summer heat, and forms tight welded flashings around ventilation units.
TPO Roofing details
Standing seam panels fit sloped sanctuary and entry roofs, shedding snow from steep pitches, with snow guards placed over doors and walkways.
Commercial Metal Roofing details
Shops and plants in town with rooftop fans and units get industrial roof systems flashed around each piece of equipment.
Industrial Roofing detailsCall and tell us which room is leaking. We check the roof above it and the drains nearby.
Send the address and your quiet periods. We plan the work around them before pricing.
Get A Free EstimateInstitutional roofs follow the building's calendar from start to finish.
We walk each roof section, check wall flashing, drains, and eaves, and take core cuts over the rooms where leaks were reported.
Services, classes, and events set the work hours, and the loudest sections go into breaks or empty days.
Pews, desks, and equipment under open roof sections are covered, and each section is closed before the building fills.
The finished roof is walked with your building manager, and the record of the work goes to the board.
Any roofs or details that should be checked before winter are noted, and the dates go to your building manager.
Is your school or church in a neighboring town? These are covered too; for anywhere else, call us or send us a message.
What church and school leaders in Somers ask about roof work.
Yes. Loud work happens on weekdays when the building is empty, each section is closed watertight before the weekend, and nothing is left open over the sanctuary during services.
More roofing questionsSummer break is the usual choice, since classrooms are empty and the weather suits roofing. Smaller sections can be done during other breaks or on weekends.
We rebuild edge details and gutters, keep drains clear, and add membrane at the eaves so meltwater leaves the roof instead of backing up under the edge.
A written scope that lists tear-off or recover, insulation, flashing, drains, schedule, and price, with photos from the roof walk.
Loud tear-off moves to early mornings, weekends, or breaks, and quieter work such as flashing and seam welding fills school hours.
The systems are the same: TPO, EPDM, and metal. What changes is the schedule and the details at towers, tall walls, and skylights.
Only small sections are opened at a time and closed watertight before the crew leaves. Where a ceiling is fragile, we add protection under the work area.
Yes. Large school or church roofs can be done in phases, with the worst sections first and the rest the next summer, as long as the first phase is tied in watertight at its edge.
Send the building address and your quiet periods for a roof walk, or call about a leak before your next service.